Swingarm Removal; Swingarm Disassembly - Honda VT600C Shadow VLX Service Manual

REAR WH EEL/BRAKE/S U S P E N S I O N
SWI NGARM
R E M OVAL
Remove the rear wheel (page 1 3-3)
Remove the gearshift pedal mounting bolt from the foot peg .
Remove the drive sprocket cover.
Remove the drive sprocket bolts, set plate and drive sprocket.
Disconnect the gearshift arm from the gearshift spindle.
Remove the reserve tank from the frame ( page 5-9)
Remove the shock absorber lower mounting bolt and nut.
Remove the swingarm pivot bolt caps, pivot bolt and nut then
remove the swingarm from the frame .
D I SA S S E M B LY
Inspect the drive chain slider for wear or damage.
Replace it if necessary.
Inspect the drive chain for dirt or damage .
Clean or replace it if necessary ( page
Remove the following :
- drive chain slider and chain cover
- dust seals and pivot collars
1 3- 1 4
(i')
3 - 1 4 )
( 1 PEDAL
I
BOLT
�
DRIVE S 2 ) BO LTS
COVER
( 1 CHAIN COVER
I