CRANKS HAFT/TRANSMISSION
CRAN KCASE SEPARATION
Remove the engine from the frame ( Sectio n 6).
Refer to the service i nformation ( page 1 1 - 1 ) for the parts that
must be removed before the separating the crankcase .
Remove the oil pipe stay and cam chain tensioner set plate by
removing the bolts .
Remove the rear cam chain and cam chain drive sprocket.
Remove the bolt and cam chain tensioner set plate .
Remove the front cam chain from the crankshaft.
Remove the 8 mm bolts and 6 mm bolts from the left crank
case .
NOTE
Remove the bolts in a crisscross pattern in
•
Loosen the 6 mm bolts first, then loosen the 8 mm bolts .
•
Remove the 8 m m bolts and 6 mm bolts from the right crank
case .
NOTE
Remove the bolts in a crisscross pattern in
•
Loosen the 6 mm bolts first, then loosen the 8 mm bolts .
•
1 1 -4
2
or 3 steps.
2
or 3 steps.
•