Swingarm Assembly/Installation - Honda VT600C Shadow VLX Service Manual

A S S E M B LY / I N STA L LAT I O N
I nstall the chain slider a n d chain cover with protector .
I nstall t h e swingarm in t h e frame.
I nstall the swingarm pivot bolt and nut, and tighten the nut to
the specified torque.
TORQU E : 90 N · m ( 9 . 0 kg-m, 6 5 ft-lb)
I nstall the li·h ock absorber lower mounting bolt and nut.
TUr1\:.. � E : 45 N•m (4. 5 kg-m , 33 ft-lb)
I nstall the following :
- swingarm pivot caps
- reserve tank (page 5-9)
canister (California model only)
- evapo rative e m iss i o n
- drive sprocket with the drive chain
- gearshift arm
I nstall the drive sprocket cover and tighten the mounting bolt.
I nstall the gearshift pedal mounting bolt.
Apply grease to the gearshift pedal pivot collar refer to page
7-9.
Adjust the drive chain (page
3 - 1 6 )
play ( page
- rear wheel (page 1 3-7)
3 - 1 3 )
and rear brake pedal free
REAR WH EEL/BRAKE/S USPENSION
( 1 ) CHAIN COVER
(2) CHAIN SLIDER
I
I
I
I
( 1 ) PIVOT NUT
1 3- 1 7