R IGHT CRAN KCASE COVER REMOVAL
'88, '89:
Drain the engine oil ( page
2 - 4 ) .
Remove the clutch cable holder and disconnect the clutch
cable from the clutch lifter arm .
Loosen the oil pipe holder and remove the oil pipe bolt and seal
ing washers from the right crankcase cover.
Remove the right crankcase cover bolts and cover.
After '89:
Drain the engine oil ( page
2 - 4 ) .
Remove the clutch cable holder and disconnect the clutch
cable from the clutch l ifter arm .
Remove the right crankcase cover bolts and cover.
Remove the dowel pins and gasket.
'88, '89 :
Remove the oil orifice.
C L U T C H L I FT E R S H A FT
Remove the clutch lifter piece, and remove the snap ring and
return spring from the right crankcase cover.
Remove the clutch lifter shaft.
Check the clutch lifter piece and shaft for damage or excessive
scratching .
Check the return spring for fatigue or damage.
CLUTCH/GEARS H I FT L I N KAGE
7 -3