Ethernet Connection - Samsung SNP-6320RH User Manual

electrical resistance of copper wire at [20°c (68°f)]
Copper Wire Gauge (AWG)
Resistance (Ω/m)
Drop Voltage (V/m)
Recommended Distance (m)
As shown in the table above, you may encounter a voltage-sag depending on the wire length.
`
If you use an excessively long wire for camera connection, the camera may not work properly.
-
Camera Operating Voltage: AC 24V±10%
-
Voltage drop measurements on the chart above may vary depending on the type and manufacture of
the copper cable.

ethernet connection

Connect the Ethernet cable to the local network or to the Internet.
Connecting the installation monitor
Connect the cable to the camera's rear video output terminal and the installation monitor's
video input terminal.
1143Н 1143Н
The wiring varies depending on your monitor type and peripheral devices; please refer to the user manual
`
for each device.
Please make sure the monitor and camera are turned off when connecting them.
`
#24(0.22mm ) #22(0.33mm
2
0.078
0.028
Less than 20
1143Н
) #20(0.52mm
2
0.050 0.030
0.018 0.011
Less than 30 Less than 30
) #18(0.83mm )
2 2
0.018
0.006
Less than 30
Monitor
English _19