Samsung SNP-6320RH User Manual page 23

6. Secure Camera and Installation Base
As shown in the picture below, secure the
installation base and camera using 3 hexagon
screws.
notes for waterproofing
This model is an integrated housing product for outdoor installation.
` when combining the main body and the wall mount for installation on the
wall
1. Install the wall mount on the vertical
wall. When it is installed on an inclined
wall, moisture may permeate into the
main body through the external cable.
2. Wrap the screw part of the housing with
a sufficient amount of Teflon tape for
assembly.
3. Please make sure that the gasket is
not disassembled from the shield cover
when the shield cover is separated and
mounted on the housing body.
4. Install the wall mount adapter for
waterproofing, and apply the silicon
sealant between and around the wall
and wall mount for sealing.
Take particular caution to ensure that there
`
J
is proper sealing if the installed side is not
flat.
Silicon
sealant
Wall mount
Screw
unit
Concrete wall
Teflon tape
Shield gasket
English _23