Samsung SNP-6320RH User Manual page 73

To configure the detailed settings for the preset
1. Select the number of preset that you
want to configure.
• After action : For <after action>,
execute the given preset and specifiy
whether to run automatic trace/
automatic execution/ image analysis
motion. (This setting does not apply
in the swing function.)
- Auto tracking : Run the automatic
trace motion until the configured trace time.
- Auto run : The sequence setting for auto execution is performed. If you turn off the
function or if there is no auto-executing operation, the preset operation status is
maintained. (This setting is not applied if preset is run with a group or tour function.)
- Video analysis : MD/VA operation is run.
• Camera setup : You can change the camera setting to the environment of the
selected preset.
Refer to "camera setup" for how to set the camera. (page 87)
• MD / VA : You can set the system to generate an event signal when a movement
is detected in the preset, or an intelligent video analysis event is detected.
For more details, refer to "mD / va". (Page 120)
2. When done, click [apply (
After saving the preset setting, make sure to select <Sequence Setup> or run the preset. If
`
J
the operation is not performed, the system may run a wrong operation, such as an unintended
change of preset setting.
While setting preset edit, you cannot use the functions, such as preset setting, home position
`
setting and move to the home position.
)].
English _73