appendix
communication protocol Dip Switch Settings (Sw1)
ON
SW1 Pin No.
7
8
9
1~6, 10
• Communication Method Settings
Select a communication method for the camera.
SW1-#7
• Termination Settings
To prevent the attenuation of communication signals between the camera and controller,
the items at the end of line must be set up with the termination settings.
Camera Input Position
Termination of Longest Path
On the Path
The default value is shaded in each setting table.
`
M
To use a third party controller with this product, please contact our After-Sales Service or
`
Technology Department.
138_ appendix
SW1
Set transmission protocol (RS-485/422)
Termination setting 1
Termination setting 2
Reserved
Function
Transfer Mode Switch
Purpose
ON
RS-422(4Wire)
SW1-#8
ON
OFF
ON
OFF
OFF
RS-485(2Wire)
SW1-#9
ON
OFF