4. Pull up the SD holder bracket and push the SD
memory card to the arrow direction as shown in
the figure.
Do not insert the SD memory card while it's upside
J
`
down by force. Otherwise, it may damage the SD
memory card.
5. Assemble the camera in the reverse order of
disassembly after the SD memory card is inserted.
Tighten the screws when assembling the camera to prevent moisture penetration.
J
`
removing a SD memory card
Gently press down on the exposed end of the memory
card as shown in the diagram to eject the memory card
from the slot.
Pressing too hard on the SD memory card can cause
`
J
the card to shoot out uncontrollably from the slot when
released.
To turn off the camera or remove the SD memory card,
`
set the card to <Off> in <Storage> menu and press
the [Apply (
If you turn off the camera or remove the SD memory card that contains data from the product, the
`
data may be lost or damaged.
)] button. (page 108)
English _29