Samsung SNP-6320RH User Manual page 131

upgrade / reboot
1. From the Setup menu, select the
<System ( )> tab.
2. Click <upgrade / reboot>.
3. Select a desired item and set it
appropriately.
• Upgrade : Performs upgrading the
system.
• Factory default : Resets the system
to the factory default.
- Except network parameter & Open
SDK : Initialize all except for the network setting and lens settings as well as the
open SDK installation files and internal settings.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is
`
found, the previous settings will be restored automatically.
• Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
• Restart : Restarts the system.
English _131