Samsung SNP-6320RH User Manual page 109

If the "Error" message does not disappear after following the instructions, format the SD card.
`
After formatting, if the error message still remains, replace the SD card.
If you remove the SD card without changing a button to 'off' position in settings or if you connect
`
a camera to an unstable power source, the SD card may be damaged.
to make recording on the SD memory
1. Check the memory card's <free size> and <total size>.
2. Otherwise, check the stored data and if you find them not important, then click
<format> to format the SD memory.
Some frames may be skipped if the SD memory card operates at the lower speed than recommended.
`
For more details, refer to "Recommended SD/SDHC/SDXC Memory Card Specifications". (Page 11)
For a SD memory card with a large capacity, the formatting will be slowed down accordingly.
`
The data traffic will increase when the camera is set to higher resolution, higher bit rate, and/or higher
`
framerate.
If there is too much data traffic, some frame may be skipped although it is stored in a full frame.
When a frame skip occurs, images are saved at the rate of min. one image per sec.
`
3. Specify the storage action.
• Record profile : The name of the recorded profile will be displayed.
• Normal : Make recording at a certain frame rate.
• Event : Set the recording type for a certain event that occurs.
• Pre event duration : Specify the time point before the occurrence of the event;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the event.
• Post event duration : Specify the time point after the occurrence of the event; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the event.
• Record file type : It specifies the file format of the recorded images.
If you insert a SD card saved in another saving file type (AVI/STW), you will need
to format it before use.
- STW : It is Samsung Techwin's unique file format.
- AVI : It is the conventional avi format.
• Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
• Auto delete : Data for a certain period is deleted, while other data is not deleted.
This can be set within the range of one day to 180 days.
If the storage period is expired, data is automatically deleted and new data will be recorded. Once
`
J
deleted, it cannot be recovered.
English _109