Ethernet Connection - Samsung SND-5084R User Manual

installation & connection
Ethernet
Power
The CVBS out terminal of the product is provided for easier installation, and is not recommended
`
J
for monitoring purposes.

ethernet connection

Connect the Ethernet cable to the local network or to the Internet.
power Supply (SnD-5084r)
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
If both PoE and DC 12V are applied simultaneously, the product will be supplied with power from
`
J
PoE.
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE 802.3af protocols.
- It is advisable to use only one power source from PoE and DC 12V.
Be careful not to reverse the polarity when you connect the power cable.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
42_ installation & connection
<SNV-5084R>
Monitor to
install