Connecting With Other Device; Preparing Adapter And Cable - Samsung SNP-6320RH User Manual

installation & connection

connectinG witH otHer Device

preparing adapter and cable

Connect the camera to the power adaptor. Then, plug the power cord of the adaptor to the wall
J `
outlet.
AXICOM
IMO3
AXICOM
5VDC
IMO3
5VDC
AXICOM AXICOM
IMO3 IMO3
5VDC 5VDC
AXICOM
IMO3
AXICOM 5VDC
IMO3
5VDC
IN1 IN2 GND IN3 IN4 GND 1C0M 1.N0 1.NC 2C0M 2.N0 2.NC IN1 IN2 GND IN3 IN4 GND 1C0M 1.N0 1.NC 2C0M 2.N0 2.NC
Check out the rated voltage and current before making connections.
Rated Power
AC 24V
The product cannot be used at -50°C or below ambient temperature.
`
J
The product may not be defrosted depending on the installation area at -50°C.
`
Leave the product always turned on to maintain the internal temperature of -10°C or higher.
`
After the product is left alone under a low temperature environment, it will take up to 3 hours to
`
normally operate.
The zooming speed of the IR dimmer may slow down at -40°C or lower environment.
`
If the product is turned on after being exposed to -40°C or below environment for some time,
`
reset the time.
18_ installation & connection
Allowable Input Voltage
AC 22V ~ 26V
Current Consumption
6 A