Ethernet Connection; Power Supply - Samsung SNB-5000 User Manual

installation & connection
The BNC Out terminal of the product is provided for easier installation, and is not recommended
`
J
for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause
damage or malfunction to the product.

ethernet connection

Connect the Ethernet cable to the local network or to the Internet.

power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
Be careful not to reverse the polarity when you connect the power cable.
`
J
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If using PoE, the heater will not operate at all. (SNV-5080)
`
Use an adaptor if the installation site requires heater operations. Adaptor is sold separately.
For the power specifications, refer to the "Appendix". (page 118)
If PoE and DC 12V are both applied, this camera will get supplied with power from PoE.
`
Please make sure the monitor and camera are turned off when connecting them.
`
The instructions above are also applied to SND-5080/SND-5080F/SNV-5080.
`
M
40_ installation & connection