Samsung SNP-6321 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SNP-6321
  6. User manual

Samsung SNP-6321 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NETWORK CAMERA

SNP-6321/SNP-6321H

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNP-6321

Summary of Contents for Samsung SNP-6321

  • Page 1: Network Camera

    NETWORK CAMERA User Manual SNP-6321/SNP-6321H...

  • Page 2: User Manual

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    15. This product is intended to be supplied by Power Unit marked “Class 2” or “LPS” and rated 24 Vac(50 or 60 Hz), min. 1.0 A. (SNP-6321) 16. This product is intended to be supplied by Power Unit marked “Class 2” or “LPS” and rated 24 Vac(50 or 60 Hz), min.

  • Page 4: Explanation Of Graphical Symbols

    overview warninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. These servicing instructions are for use by qualified service personnel only.
  • Page 6 overview Please read the following recommend safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not place this apparatus near conductive material. y Do not attempt to service this apparatus yourself. y Do not install near any magnetic sources. y Do not block any ventilation openings.

  • Page 7: Table Of Contents

    Important Safety Instructions Product Features Recomended PC Specifications Recomended SD/SDHC/SDXC Memory Card Specifications NAS recommended specs What’s Included At a Glance (SNP-6321) At a Glance (SNP-6321H) iNSTALLATioN & Connecting with other Device CoNNeCTioN Installation Inserting/Removing a SD Memory Card...

  • Page 8: Web Viewer

    overview web vieweR Connecting to the Camera Password setting Login Installing STW WebViewer Plugin Using the Live Screen Playing the recorded video SeTup SCReeN Setup Basic Setup PTZ setup Video & Audio setup Network Setup Event Setup NAS (Network Attached Storage) guide System Setup Viewing profile information...

  • Page 9: Product Features

    proDuct featureS • full HD video Quality • multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • web Browser-based monitoring Using the Internet web browser to display the image in a local network environment. •...

  • Page 10: Recomended Pc Specifications

    overview recomenDeD pc SpecificationS • CPU : Intel Core 2 Duo 2.6 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps) Web Plug-in is optimized to SSE 4.1 Instruction Set. •...

  • Page 11: Memory Card Specifications

    recomenDeD SD/SDHc/SDXc memory carD SpecificationS • 4GB ~ 64GB • For your camera, we recommend you use a memory card from the following manufacturers: SD/SDHC/SDXC Memory Card : Sandisk, Transcend • For the framerate below 30 fps, it is recommended to use the specification memory card of Class 6 or higher.
  • Page 12 Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name Camera Instruction book, Installer S/W CD Quick Guide SNP-6321 or (Optional) SNP-6321H Warranty card (Optional) Used to test the camera Cable for the testing connection to a portable display monitor device...
  • Page 13 Appearance Item Name Quantity Description Model Name Template Product installation guide SNP-6321 Use when installing the camera Insulation Sheet at highly humid place Used for attaching the Hexagon screw installation base to the camera Used for fixing the installation L Wrench...
  • Page 14 GLance (Snp-6321) appearance inside Item Description Protects the internal PTZ mechanism from the direct sunlight or external Main unit impact. Dome Cover Dome cover for the lens and unit protection. Pressing and holding this button for about 5 seconds will reset all camera Reset Button settings to the factory default.
  • Page 15 Bottom view of installation inner view of installation Base Base AUDIO IN AUDIO OUT 2 3 4 UART Termination RS-422 ON NO Termination OFF OFF RS-485 OFF Termination ON ON Switch No.4 : Not used Pin Item Description Communications Used for RS-485/422 communications. Ports Audio Input Port Used to connect the audio input cable.
  • Page 16 overview Item Description Alarm I/O Port Used to connect the alarm I/O cable. Communications Set communication protocol (RS-486/422) and indicate whether to Setup Switch terminate. Network You can use a PoE+ or an Ethernet cable to connect this terminal to the Connections network.
  • Page 17 at a GLance (Snp-6321H) appearance Item Description Protects the internal PTZ mechanism from the direct sunlight, rain or Main unit external impact. Dome Cover Dome cover for the lens and unit protection. Safety Cable The cable prevents the product from dropping during installation. English _17...
  • Page 18 overview inside Item Description Pressing and holding this button for about 5 seconds will reset all camera Reset Button settings to the factory default. SD Memory Card Compartment for the SD memory card. Compartment 18_ overview...
  • Page 19 Bottom view of installation inner view of installation Base Base AUDIO IN AUDIO OUT Item Description Communications Used for RS-485/422 communications. Ports Audio Input Port Used to connect the audio input cable. Audio Output Port Used to connect the audio output cable. Video Out Port Analog video output port.
  • Page 20 overview Item Description Alarm I/O Port Used to connect the alarm I/O cable. Communications Set communication protocol (RS-486/422) and indicate whether to Setup Switch terminate. Network You can use a PoE+ or an Ethernet cable to connect this terminal to the Connections network.

  • Page 21: Camera Wiring Interface Board

    AUDIO OUT Alarm Input Power Supply ETHERNET (SNP-6321 : AC 24V, 2.5A/ SNP-6321H : AC 24V, 3A) Power Input Ground Select Normal Open in the setup menu. The sensor input is activated during a short for contact type, or when it is at “Low” level for the active type.

  • Page 22: Connecting With Other Device

    Check out the rated voltage and current before making connections. Rated Power Allowable Input Voltage Current Consumption (SNP-6321 : AC 24V, 2.5A/ AC 24V AC 22V ~ 26V SNP-6321H : AC 24V, 3A) If applied with both PoE+ and AC 24V power supplies, the device is powered from the first engaged supply.

  • Page 23: Ethernet Connection

    electrical resistance of copper wire at [20°c (68°f)] Copper Wire Gauge (AWG) #24(0.22mm ) #22(0.33mm ) #20(0.52mm ) #18(0.83mm Resistance (Ω/m) 0.078 0.050 0.030 0.018 Drop Voltage (V/m) 0.028 0.018 0.011 0.006 Recommended Distance (m) Less than 20 Less than 30 Less than 30 Less than 30 As shown in the table above, you may encounter a voltage-sag depending on the wire length.
  • Page 24 installation & connection Connecting the installation monitor Connect the cable to the camera’s rear video output terminal and the installation monitor’s video input terminal. Monitor The wiring varies depending on your monitor type and peripheral devices; please refer to the user manual for each device.
  • Page 25 & installing camera Bracket For installation guidelines for brackets and housings, refer to the installation manual that is enclosed with the bracket or housing. ` available Bracket models Model Item SNP-6321 SNP-6321H SHP-3701H Outdoor Housing SHP-3701F Ceiling-mount Housing SBP-300HM3...
  • Page 26 installation & connection installing by surface attachment SNP-6321H cannot be installed on the surface of a wall or ceiling. ` attaching template & installing installation base 1. Attach the provided template on the ceiling. Based on the template, drill a 86mm hole in the ceiling and arrange the wires through the hole.
  • Page 27 ` connect terminal wires 1. Connect the cables to the terminal block on the hinged door. Refer to “camera wiring interface Board”. (page 21) 2. Once the wiring is complete, close the hinged door. Do not connect the camera to a power outlet until the installation is complete.
  • Page 28 installation & connection - To attach or detach the camera, refer to the picture. • Attaching the Camera : Push up the camera unit and rotate it clockwise until it cannot be rotated anymore, as shown in the figure. After rotation, fasten the screws assembled to the install base.
  • Page 29 installing by wall mount ` fix the installation base with the bracket 1. Fix the base with the bracket by turning it clockwise. 2. As shown in the picture below, gently press and lift up the handle of the hinged door on the bottom of the installation base.
  • Page 30 installation & connection 3. Connect the camera safety wire to the installation base. Safety Cable 4. Assemble Camera and Installation Base Assemble the installation base and camera by matching the installation direction guides. 30_ installation & connection...
  • Page 31 5. Attach Camera Rotate the mounted camera unit clockwise so that the reference indicators of top and bottom are as shown in the image on the right. 6. Secure Camera and Installation Base As shown in the picture below, secure the installation base and camera using 3 hexagon screws.
  • Page 32 installation & connection notes for waterproofing This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it waterproof. ` installing the unit on the wall by combining the outdoor housing and wall mount 1.

  • Page 33: Optional Accessories For Installation

    ` installing on the wall by combining the outdoor housing and ceiling mount adapter 1. Wrap the screw part of the housing Concrete ceiling with a sufficient amount of Teflon tape for assembly. 2. When separating the dome cover and Silicon Ceiling mount fastening it to the housing frame, make...
  • Page 34 installation & connection • Wall mount (SBP-300WM) 2. If installing the camera on the ceiling • Ceiling Mount (SBP-300CM) 3. If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder • Pole Mount (SBP-300PM) 34_ installation & connection...
  • Page 35 4. If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall • Corner Mount (SBP-300KM) 5. If installing on a building rooftop • Parapet Mount (SBP-300LM) 6. If installing SNP-6321 outdoors • Outdoor Housing (SHP-3701H) English _35...
  • Page 36 & connection 7. If installing SNP-6321 on a ceiling as built-in component • Flush-Mount Indoor Housing for PTZ Dome Camera (SHP-3701F) 8. If installing SNP-6321 in the wall mount or ceiling mount • Hanging Mount (SBP-300HM3) 36_ installation & connection...

  • Page 37: Inserting/Removing A Sd Memory

    Disconnect the power cable from the camera before inserting the SD memory card. inserting a SD memory card 1. Turn dome cover counterclockwise to open. (SNP-6321) Using the screw driver, loosen 3 screws by turning them counterclockwise and separate the dome cover.
  • Page 38 installation & connection 2. Push the SD memory card in the direction of the arrow shown in the diagram. Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the SD memory card. removing a SD memory card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card...

  • Page 39: Not Included

    memory carD information (not incLuDeD) what is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SD/SDHC/SDXC memory cards.

  • Page 40: Connecting The Camera Directly

    network connection and setup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2.

  • Page 41: To A Dhcp Based Dsl/Cable

    connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem INTERNET DSL/Cable External Remote PC Modem Camera DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
  • Page 42 network connection and setup connectinG tHe camera DirectLy to a pppoe moDem INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 43: Pppoe/Cable Modem

    connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband External Remote Cable Modem Cable Modem Router Camera DDNS Server (Data Center, KOREA) Local PC...

  • Page 44: Buttons Used In Ip Installer

    network connection and setup ButtonS uSeD in ip inStaLLer e f g Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented.

  • Page 45: Static Ip Setup

    Exits the IP Installer program. For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). Static ip Setup manual network Setup Run <ip installer_v2.XX.exe>...
  • Page 46 network connection and setup 3. In the <address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting. You can configure the static IP settings only if the DHCP checkbox is unchecked.
  • Page 47 if using a Broadband router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet mask> of the Broadband Router will be the <Subnet mask>...
  • Page 48 network connection and setup auto network Setup Run <ip installer_v2.XX.exe> to display the camera search list. At the initial startup, both [auto Set] and [manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 49: Dynamic Ip Setup

    Dynamic ip Setup Dynamic ip environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN checking the Dynamic ip 1.

  • Page 50: Port Range Forward (Port Mapping

    network connection and setup port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range forwarding 1.

  • Page 51: Connecting To The Camera From A Shared Local Pc

    connectinG to tHe camera from a SHareD LocaL pc 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet browser.

  • Page 52: Connecting To The Camera

    web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...

  • Page 53: Password Setting

    To register your device to the <DDnS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <network> - <DDnS> to <Samsung DDnS>, as well as providing <product iD> that had been used for DDNS registration.
  • Page 54 web viewer LoGin Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera. 1. Enter “admin” in the <user name> input box. The administrator ID, “admin”, is fixed and can not be changed. 2.
  • Page 55 inStaLLinG Stw webviewer pLuGin If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the very first time, the installation page is displayed.
  • Page 56 web viewer 5. Click [oK]. The old version of Web Viewer Plug-in is deleted. 6. Click [install] to begin installation of the Web Viewer Plug-in. 7. Click [finish]. STW Web Viewer Plug-in installation is completed. In your internet explorer, if you need to move to the installation screen after installing the STW webviewer plugin, check whether webviewer_...

  • Page 57: Using The Live Screen

    uSinG tHe Live Screen Item Description Monitoring Move to the monitoring screen. Move to the screen where you can search for the video recording saved in your SD Playback memory card or NAS. Setup Move to the Setup screen. Profile access You can read the profile information.
  • Page 58 web viewer Item Description Regardless of the resolution setup configured in the camera, it sets the resolution to Fix the resolution 640x480. Press it again to switch back to the default resolution. Full Screen Switch the current video to the maximum size of the monitor. Capture Saves the snapshot as an image file in the .jpg format.
  • Page 59 to capture the snapshot 1. Click [capture ( )] on the scene to capture. 2. When a captured video is saved, a notification message appears. When using Internet Explorer, the captured video is saved in My Computer / My Documents / Pictures. In Mac OS, it is saved in “~/Pictures”...
  • Page 60 web viewer to use audio 1. Click [audio ( )] icon to activate audio communication. 2. Use [ ] bar to control the volume. If there is no sound from pulling in and out the audio jack while it is in operation, click the [Audio ( )] icon to enable it again.
  • Page 61 : Run a saved tour. • Refer to “to configure the tour settings” for details of tour setting. (page 84) : Run a saved trace. • Refer to “to set the tracing function” for details of trace setting. (page 84) : Run a saved home position.
  • Page 62 web viewer pLayinG tHe recorDeD viDeo Before you can play the video, you must configure the record settings. For details on record settings, refer to “Storage”. (page 111) name of event search screen and its function Item Description Set the search date and time range for data saved in your SD memory card Search range setting or NAS.
  • Page 63 to play the content after searching by event 1. Click the [playback ( )] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [event search] button. The search results will be displayed in the list.
  • Page 64 web viewer name of time search screen and its function Item Description Time bar The section in the specific period is played by moving the time bar. Set the search date using the calendar. Search date setting If there is data saved in your SD memory card or NAS on the day, it is marked as a box on the calendar.
  • Page 65 Item Description Video information Time data of the replayed video is displayed on the screen. Set the desired date to make a backup copy of video data saved in your SD Backup memory card or NAS. Can be set as up to 5 minutes. to play after searching by time 1.
  • Page 66 web viewer 6. Move [time bar ( )] to a desired time point of the video before playing it. The time containing a normal recoding file will be highlighted in blue; the time with the event recording will be highlighted in red. to back up the searched video 1.
  • Page 67 to play an avi file (1) SD memory card 1. Separate the SD memory card from the camera. Before separating the SD memory card, set the <Device> to <Off> in the “Setup  Event  Storage” menu. 2. Insert the SD memory card into the PC. 3.
  • Page 68 web viewer (2) naS (network-attached Storage) 1. In Windows browser, use \\<ip address>\ to access. ex)\\192.168.20.31\defaultfolder\ch01\ img\2013_07_02\AVI 2. Go to <computer>  <network drive connection>  Enter 1. 3. Connected to the NAS. The directory structure is same as the directory structure for a SD memory card.

  • Page 69: Basic Setup

    setup screen Setup On the network, you can set up basic information on the camera, video and audio, network events and system. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. The setting page for preview video requires the STW web viewer plug-in to be installed on the PC. If it is not intalled properly, the installation page automatically apprears.
  • Page 70 setup screen 4. Select each profile properties. For more details, refer to “to add/change the video profile”. (Page 72) 5. Click the input box of each item and enter / select a desired value. The context menu may differ depending on the selected codec type. •...
  • Page 71 • ATC sensitivity : Affect the transfer rate according to the variance in the network bandwidth. The transfer rate will be adjusted to the fastest if the bandwidth is <very high>, and adjusted to the latest if the bandwidth is <very low>. •...
  • Page 72 setup screen to add/change the video profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the <video profile> options. 2. Provide the name and select a codec. 3.
  • Page 73 • Encoding priority : You can set the priority of video transmission to frame rate or compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + 0~Several P-Frames) •...
  • Page 74 setup screen user 1. From the Setup menu, select the <Basic ( )> tab. 2. Click <user>. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator. For the security purposes, you are recommended to use a combination of numbers, alphabets uppercase and lowercase and special characters for...
  • Page 75 If the existing password is not matched, when you change the admin password, you cannot change the password. After changing your password, if there is a camera connected to a CMS or NVR client, then you need to re-register it with the newly changed password. If the camera is still connected with the same password, then the account may be locked because a client uses the previous password.
  • Page 76 setup screen Date & time 1. From the Setup menu, select the <Basic ( )> tab. 2. Click <Date & time>. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system.
  • Page 77 ip & port 1. From the Setup menu, select the <Basic ( )> tab. 2. Click <ip & port>. 3. Set the <ipv4 setup>. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.

  • Page 78: Event Setup

    • Use timeout : When connecting to RTSP, this function resets the connection if there’s no response for a certain time. • Device port : Set a port used to transfer video signals with the Samsung protocols. If changed the HTTP port, the browser exits.

  • Page 79: Ptz Setup

    ptZ Setup preset setup You can change the direction of lens and activate the zoom. 1. From the Setup menu, select the <ptZ )> tab. 2. Click <preset setup>. 3. Click [▼ Show]. 4. Click the cursor [ ] on the screen moving pad to control movement of the screen.
  • Page 80 setup screen To add the home position 1. Move to a desired start screen point and press [ The point will be set to the home position. 2. Click [ ] in the home position. You will move to the predetermined home position. 3.
  • Page 81 To configure the detailed settings for the preset 1. Select the number of preset that you want to configure. • After action : In the <after action>, you can select auto execution/video analysis operation after the preset operation. (This setting does not apply in the swing function.) - Auto run : The sequence setting for auto execution is performed.

  • Page 82: Ptz Sequence

    setup screen ptZ sequence 1. From the Setup menu, select the <ptZ )> tab. 2. Click <ptZ sequence>. 3. Set swing, group, tour, tracing & auto operation. To configure the swing settings Swing is a monitoring function that moves between two preset points and enables you to trace the motion.
  • Page 83 To set a group The group function enables you to group various presets before calling them in sequence. Six groups can save a total of 128 presets each. 1. Select <Group>. The menu screen will switch to the group setting screen. 2.
  • Page 84 setup screen To configure the tour settings The tour function enables you to call groups of your presets in sequence. 1. Select <tour>. The menu screen will switch to the tour setting screen. 2. Configure the tour settings in detail. •...
  • Page 85 3. Press the [ ] button. Selected tracing number will be saved. 4. Move the navigation path of saving using the pan/tilt/zoom. 5. Press the [ ] button. Saving is terminated. 6. Press the [ ] button. Selected tracing number will be activated as set. To set the auto run This feature will activate the predefined sequence function if the user does not manipulate anything on the product for a certain time.
  • Page 86 setup screen pt limit You can specify restrictions on the pan or tilt function. 1. From the Setup menu, select the <ptZ ( )> tab. 2. Click <pt limit>. 3. Decide if you want to limit the PT operations. If so, specify the details. •...
  • Page 87 (RS-485/422). • Protocol : Select the same protocol version as the controller, choosing from SAMSUNG-T / SAMSUNG-E / PELCO-D / PELCO-P / PANASONIC / HONEYWELL / AD / VICON / GE / BOSCH.
  • Page 88 REV.B BOSCH AutoDome Protocol 5/30/11 Calibur ImpacNet(RS485 Protocol) REV.4.01(05/21/2004) HONEYWELL ScanDomeII Protocol V1.05(02/11/2004) PANASONIC WV-CS950 Protocol VER,4.0 PELCO-D “D” Protocol Ver.4, Rev.1(4/7/2004) PELCO-P “P” Protocol SAMSUNG-E Samsung Protocol Ver. 2.3(2006/09) RS-422 Receiver Communications VICON Rev 404(4/08/04) Protocol 88_ setup screen...

  • Page 89: Video Setup

    viDeo & auDio Setup video setup 1. From the Setup menu, select the <video & audio ( )> tab. 2. Click <video setup>. 3. Select a <video source> mode. • Flip/Mirror : Displays the video from the camera upside down or reversely. •...
  • Page 90 setup screen to set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to <on>. 2. Select the pattern and color of the privacy field to be set. 3.

  • Page 91: Audio Setup

    audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the <video & audio ( )> tab. 2. Click <audio setup>. 3. Set the audio input value. • Source : Sets the audio input. - Line : Connect the cable to the audio device.

  • Page 92: Camera Setup

    SSDr (Samsung Super Dynamic range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness.
  • Page 93 white balance Setup You can correct the image colors based on white under any lighting conditions. 1. Select <white balance>. 2. Select <mode>. • ATW : Corrects the colors of the camera video automatically. ATW does not work under mercury/ sodium lamps.
  • Page 94 setup screen BLc Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Back light>. 2. Set <mode> to <BLc>. If you select BLC, the Box adjustment screen and the BLC box step are displayed on the PTZ Control screen.
  • Page 95 wDr Setup You can set to display a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select <Back light>. 2. Set <mode> to <wDr>. 3. Select each item and set it properly. •...
  • Page 96 setup screen For the best WDR performance, it is recommended to set the Iris mode to <Auto>. Since the auto focus operation can be repeated depending on the lighting condition if user backlight compensation is used, it is recommended to use the focusing mode of <One Shot AF> or <Manual>.
  • Page 97 Special Setup 1. Select <Special>. 2. Select each item and set it properly. • DIS : Automatically compensates for the flicker on the screen. DIS cannot be used if VA/MD and tempering detection are used. Digital zoom cannot be used if DIS is used. •...
  • Page 98 setup screen focus Setup 1. Select <focus>. 2. Select each item and set it properly. • Mode - Manual : The focus will be adjusted manually according to the zoom factor. - Auto : The focus will be adjusted automatically according to the zoom factor. - One Shot AF : Auto Focus will be performed once after the zooming operation.
  • Page 99 oSD Setup 1. Select <oSD>. 2. Select each item and set it properly. • Camera title : Specify whether or not to display the camera title on the screen. You can enter up to 15 characters for the title. • Camera title X, Y : Specify the coordinates where the camera title is displayed on the screen.
  • Page 100 setup screen Smart codec Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the <video & audio ( )> tab. 2. Click <Smart codec>. 3.

  • Page 101: Network Setup

    - User name : Enter the user name for the DDNS service. - Password : Enter the password for the DDNS service. 5. When done, click [apply ( If selected <Quick connect>, be sure to select Samsung DDNS service. English _101...
  • Page 102 DDnS to register your product with the Samsung DDnS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDnS Service> - <my DDnS>. 3. Click [proDuct reGiStration].
  • Page 103 Samsung DDnS in camera setup 1. From the DDNS setup page, set <DDnS> to <Samsung DDnS>. 2. Provide the <product iD> that you registered product ID with the DDNS site. 3. Click [apply ( When the connection is successfully made, you will see the message of <(Success)>...
  • Page 104 setup screen ip filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <network ( )> tab. 2. Click <ip filtering>. 3. Select <filtering type>. •...
  • Page 105 You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
  • Page 106 setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <network ( )> tab. 2. Click <802.1x>. 3. Set the <ieee 802.1x setting(eapoL using eap-tLS)>. •...
  • Page 107 You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <network ( )> tab. 2. Click <QoS>. 3. Click the [add ( )] button. The IP list will be created. 4.
  • Page 108 setup screen • Enable SNMP Trap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information is invalid.
  • Page 109 • UPnP discovery : It specifies Able or Disable for UPnP Discovery. • Friendly name : Display the camera name. Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC Address>. In the Windows operating system which basically supports UPnP, the cameras connected to the network are displayed.
  • Page 110 setup screen event Setup ftp / e-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the <event ( )>...
  • Page 111 • E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server.
  • Page 112 If you insert a SD card saved in another saving file type (AVI/STW), you will need to format it before use. - STW : It is Samsung Techwin’s unique file format. - AVI : It is the conventional avi format.
  • Page 113 4. Specify the <normal record setup>. • Always : Always save recorded video in the SD memory card. If set to Always, the activation time cannot be changed. • Only scheduled time : Records only on the specified time of the specified day of week. •...
  • Page 114 setup screen Confirm that the NAS IP address and the camera IP address are in the same format. ex) The NAS & camera subnet mask initial value is 255.255.255.0. If the IP address is 192.168.20.32 then the NAS IP address should be in the range of 192.168.20.1~192.168.20.255.
  • Page 115 naS (network attached Storage) guide When you use the NAS, you might be unable to save data due to temporary network disconnections. If the setting allows a SD memory card and the NAS to be simultaneously connected for use, the higher priority for recording goes to the NAS.
  • Page 116 setup screen 3. Click the <Shared folder> in the file sharing and privilege menu. 4. Click the [create] button. 5. After entering the shared folder name(ID), click the [oK] button to create a shared folder. In this example, the shared folder name is [testDirectory].
  • Page 117 8. After clicking the [create] button, enter name(ID) and password. In this example, name(ID) is set to [testiD] and password is also set to [testiD]. According to the NAS recommendations, when you use Netgear’s NAS equipment, do not allocate the capacity for use. 9.

  • Page 118: Alarm Output

    setup screen alarm output 1. From the Setup menu, select the <event ( )> tab. 2. Click <alarm output>. 3. Set the camera’s type of alarm output. If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly.

  • Page 119: Alarm Input

    alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <event ( )> tab. 2. Click <alarm input>. 3. Select the alarm input number. 4. Set whether or not to <enable>. 5.
  • Page 120 setup screen 7. Specify an operation that will perform if an alarm occurs. • FTP : Specify the use of FTP transfer in the alarm input setup. Refer to “FTP / E-mail” for more details. (page 110) • E-mail : Specify the use of email transfer in the alarm input setup. Refer to “FTP / E-mail”...

  • Page 121: Time Schedule

    time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. From the Setup menu, select the <event ( )> tab. 2. Click <time schedule>. 3. Set whether or not to <enable>. 4.

  • Page 122: Tampering Detection

    setup screen tampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the <event ( )>...
  • Page 123 mD / va Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the <event ( )> tab. 2. Click <mD / va>. 3. Set whether or not to <enable>. DIS cannot be used if Motion detection/ Video analytics is used.
  • Page 124 setup screen to use the motion Detection (mD) function 1. Select the <motion detection> mode. 2. Select the sensitivity of separating movement from the background. You can select 5 levels of sensitivity (very low/low/normal/high/very high). 3. Select the size of the object for observation.
  • Page 125 to use the intelligent video analysis (va) function 1. Select the <video analytics> mode. 2. Select the sensitivity of separating movement from the background. You can select 5 levels of sensitivity (very low/low/normal/high/very high). 3. Select the size of the object for observation.
  • Page 126 setup screen 4. Select the type of analysis. • Passing : The system detects the change in which an object passes the preset line. • Entering/Exiting : The system detects the change in which an object passes the preset area. •...
  • Page 127 to set the video analysis rules ` passing 1. Set the type to <passing>. 2. Click the start and end point on the screen to set the base line. You can cancel the line while drawing an area by right-clicking the mouse. 3.
  • Page 128 setup screen ` appearing (Disappearing) 1. Set the analysis type to <appearing (Disappearing)>. 2. Drag the desired location of the image. The dragged grey area will be set as an area of interest. • Appearing/Disappearing : It detects event of appearing object that appears in the area and remaining for a certain time period while not passing through the area borders, and opposite case of disappearing of objects...

  • Page 129: Face Detection

    face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the <event ( )> tab. 2. Click <face detection>. 3. Set whether or not to <enable> . 4. Select <Sensitivity> tab to set the sensitivity level.

  • Page 130: Audio Detection

    setup screen audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the <event ( )> tab. 2. Click <audio detection>. 3. Set whether or not to <enable> . 4.
  • Page 131 network disconnection When the network is physically disconnected, it is considered as an event to be saved. 1. From the Setup menu, select the <event ( )> tab. 2. Click <network disconnection>. 3. Set whether or not to <enable> . 4.

  • Page 132: System Setup

    setup screen SyStem Setup product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <product information>. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. •...
  • Page 133 upgrade / reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <upgrade / reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 134 If you forcibly terminate the upgrade process, upgrade will not be completed properly. During restarting the system, accessing with web viewer will not be made. You can download the latest version from the Samsung web site (www.samsungcctv.com). 134_ setup screen...
  • Page 135 to back up the current settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”. to restore the backup settings 1.
  • Page 136 setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
  • Page 137 open SDK A user can install an application on their camera to execute additional functions. 1. From the Setup menu, select the <System ( )> tab. 2. Click <open SDK>. 3. Click the [Browse ( button to select the *.cap file from the user folder.
  • Page 138 setup screen viewinG profiLe information profile access You can check the profile information. 1. Click [Status ( )] on the live screen. 2. The profile information screen is displayed. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.

  • Page 139: Dip Switch Setting

    appendix Dip SwitcH SettinG How to set up protocols and iD Dip Switches You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment.

  • Page 140: Communication Method Settings

    appendix communication protocol Dip Switch Settings (Sw1) SW1 Pin No. Purpose Set transmission protocol (RS-485/422) Termination setting 1 Termination setting 2 Reserved • Communication Method Settings Select a communication method for the camera. Function SW1-#1 Transfer Mode Switch RS-422(4Wire) RS-485(2Wire) •...
  • Page 141 camera wirinG control Signal connection • RS-485 Communications Camera Controller TXD+ TXD- • RS-422 Communications Camera Controller TXD+ TXD- TXD+ RXD+ TXD- RXD- communications cable For the camera to communicate with the controller, a RS-485/422 communications line is required. A 30m or shorter length is recommended for the connection. The communication cable is not enclosed with the camera.
  • Page 142 Specification Description Items SNP-6321 SNP-6321H Imaging Device 1/2.9” Progressive Scan CMOS Total Pixels 1952(H) x 1116(V), 2.18M Effective Pixels 1944(H) x 1104(V), 2.14M Scanning System Progressive Scan Color : 0.3 Lux (1/30sec, F1.6, 50IRE, AGC High), 0.005 Lux (2sec, F1.6, 50IRE, AGC High) B/W : 0.03 Lux (1/30sec, F1.6, 50IRE, AGC High), 0.0005...
  • Page 143 Auto (ICR) / Color / B/W Backlight Compensation Off / BLC Wide Dynamic Range 120dB Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D+3D Noise Filter) (Off / On) Digital Image Stabilization Off / On Defog...
  • Page 144 Audio out Line out (3.5mm Mono jack), Max output level: 1 Vrms RS-485 Operational Serial Interface - Samsung-T/E, Pelco-D/P, Panasonic, Bosch, AD, GE, Vicon, Honeywell Motion detection, Tampering, Audio Detection, Face Alarm Triggers Detection, Video Analytics, Alarm Input, Network Disconnection...
  • Page 145 Description Items SNP-6321 SNP-6321H Smart Codec H.264 : Compression Level, Target Bitrate Level Control Video Quality Adjustment MJPEG : Quality Level Control H.264 : CBR or VBR Bitrate Control Method MJPEG : VBR Streaming Capability Multiple Streaming (Up to 10 Profiles) G.711 μ-law /G.726 Selectable...
  • Page 146 SNP-6321H ONVIF Profile S Application Programming SUNAPI(HTTP API) Interface SVNP 1.2 Samsung Camera Application Platform English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Webpage Language Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Network Hungarian, Greek, Norway, Finland Supported OS : Windows XP / VISTA / 7 / 8, MAC OS X 10.7...

  • Page 147: Product Overview

    ` Snp-6321 Unit : mm (inch) Ø152(5.98) Ø133.2(5.24) English _147...
  • Page 148 appendix ` Snp-6321H Unit : mm (inch) 1-1/2 inch PF TAP [Diameter (max) = 47.803mm, Pitch=2.3091mm] Ø223.4(8.8) 148_ appendix...

  • Page 149: Troubleshooting

    trouBLeSHootinG PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. I can’t access the camera from a y If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 150 appendix PROBLEM SOLUTION Can I define event rules even y Yes, it can be. You can set rules for events despite of the intelligent when I don’t use <Motion video analysis setting. detection / Video analytics>? No signal is found at the Alarm Output port even when an y Check alarm output port settings.
  • Page 151 Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 152 Gnu GeneraL puBLic LicenSe The “Program”, below, refers to any such program or work, and a “work based on the Program” means either Version 2, June 1991 the Program or any derivative work under copyright law : that is to say, a work containing the Program or a portion Copyright (C)1989, 1991 Free Software Foundation, Inc.
  • Page 153 3. You may copy and distribute the Program (or a work 7. If, as a consequence of a court judgment or allegation of based on it, under Section 2)in object code or executable patent infringement or for any other reason (not limited to form under the terms of Sections 1 and 2 above provided patent issues), conditions are imposed on you (whether that you also do one of the following :...

  • Page 154: Gnu General Public License

    no warranty You should also get your employer (if you work as a programmer)or your school, if any, to sign a “copyright 11. BECAUSE THE PROGRAM IS LICENSED FREE disclaimer” for the program,if necessary. Here is a sample ; OF CHARGE, THERE IS NO WARRANTY FOR alter the names: THE PROGRAM, TO THE EXTENT PERMITTED BY Yoyodyne, Inc.,hereby disclaims all copyright interest...
  • Page 155 Finally, every program is threatened constantly by software The “Corresponding Source” for a work in object code form patents. States should not allow patents to restrict means all the source code needed to generate, install, and development and use of software on general-purpose (for an executable work) run the object code and to modify omputers, but in those that do, we wish to avoid the special the work, including scripts to control those activities.
  • Page 156 5. conveying modified Source versions. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer You may convey a work based on the Program, or the equivalent access to the Corresponding Source in modifications to produce it from the Program, in the form of the same way through the same place at no further source code under the terms of section 4, provided that you...
  • Page 157 7. additional terms. However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) “Additional permissions” are terms that supplement the provisionally, unless and until the copyright holder explicitly terms of this License by making exceptions from one or more and finally terminates your license, and (b) permanently, if of its conditions.
  • Page 158 14. revised versions of this License. In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, The Free Software Foundation may publish revised and/ not to enforce a patent (such as an express permission or new versions of the GNU General Public License from to practice a patent or covenant not to sue for patent time to time.
  • Page 159 openSSL combined License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
  • Page 160 This product includes software developed by the using both IPv4 and IPv6. For more additional information, Computer Science Department at University College send email to help.cctv@samsung.com. London. Copyright (C) 2004, Kneschke, incremental 4. Neither the name of the University nor of the Department All rights reserved.
  • Page 161 3. Neither the name of the Regents of the University of 3. Neither the name of Thomas BERNARD nor the names California nor the names of its contributors may be used of its contributors may be used to endorse or promote to endorse or promote products derived from this software products derived from this software without specific prior without specific prior written permission.
  • Page 162 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 163 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY APPLE AND ITS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY CONTRIBUTORS “AS IS” AND ANY EXPRESS OR EXPRESS OR IMPLIED WARRANTIES, INCLUDING, IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 164 Copyright (c) 2006 Free Software Foundation, Inc. mozilla public License Since we, at Samsung Techwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1.1, we are not obliged to provide the source code of the corresponding component.
  • Page 165 1.11. “Source Code’’ means the preferred form of the Covered (d) Notwithstanding Section 2.2(b) above, no patent license is Code for making modifications to it, including all modules it granted: 1) for any code that Contributor has deleted from contains, plus any associated interface definition files, scripts the Contributor Version;...

  • Page 166: Disclaimer Of Warranty

    3.5. Required Notices. You must duplicate the notice in Exhibit 6.2. Effect of New Versions. Once Covered Code has been A in each file of the Source Code. If it is not possible to put such published under a particular version of the License, You may notice in a particular Source Code file due to its structure, then always continue to use it under the terms of that version.

  • Page 167: Limitation Of Liability

    8.3. If You assert a patent infringement claim against Participant 13. muLtipLe-LicenSeD coDe. alleging that such Participant’s Contributor Version directly or Initial Developer may designate portions of the Covered Code indirectly infringes any patent where such claim is resolved as Multiple-Licensed. Multiple-Licensedmeans that the Initial (such as by license or settlement) prior to the initiation of patent Developer permits you to utilize portions of the Covered Code infringement litigation, then the reasonable value of the licenses...
  • Page 168 the independent JpeG Group’s JpeG Software The software included in this product contains copyrighted software that is licensed under the JPEG license. • JPEG license - Code project . Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Permission is NOT granted for the use of any IJG author’s Independent JPEG Group’s free JPEG software.
  • Page 169 t-Kernel License - This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum(www.t-engine.org) t-License [License agreement for Source code of t-Kernel] established by T-Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 article 1.
  • Page 170 article 4. License of Source code 4. The Distributor of Modification shall determine the name of the Modified Source Code subject to the rules separately 1. As provided for in this Article, T-Engine Forum shall established by T-Engine Forum and publish an appropriate notice as required by the rules on the Patch for Modification provide, and grant a license to use, the Source Code free and the Modified Source Code.
  • Page 171 article 9. indemnity distribute the Ported Source Code as the Source Code for T-Kernel. Provided, however, that the Ported Source Code 1. Neither T-Engine Forum nor the copyright holder of the may be treated in the same way as the Modified Source Code until the time of registration hereunder.
  • Page 172 5. Submission of Contributions. Unless You explicitly state authorized to submit on behalf of the copyright owner. For the purposes of this definition, “submitted” means otherwise, any Contribution intentionally submitted for any form of electronic, verbal, or written communication inclusion in the Work by You to the Licensor shall be under sent to the Licensor or its representatives, including but the terms and conditions of this License, without any not limited to communication on electronic mailing lists,...
  • Page 173 BZip2 License This program, “bzip2”, the associated library “libbzip2”, and all documentation, are copyright (C) 1996-2007 Julian R Seward. All rights reserved. component name License bzip2-1.0.5 Bzip2 http://www.bzip.org/ Redistribution and use in source and binary forms, with THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS or without modification, are permitted provided that the IS’’...
  • Page 174 pHp 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. component name License php-5.2.17 PHP 3.01 http://www.php.net/distributions 6. Redistributions of any form whatsoever must retain the Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following following acknowledgment: “This product includes PHP conditions are met:...
  • Page 175 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 176 SALES NETWORK SAMSUNG TECHWIN CO., LTD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 2nd Floor, No.

This manual is also suitable for:

Snp-6321h

Table of Contents