Samsung SNP-6320RH User Manual page 120

setup screen
mD / va
Events of motion detection and video analysis can be set to trigger event signal output.
1. From the Setup menu, select the
<event (
2. Click <mD / va>.
3. Set whether or not to <enable>.
DIS cannot be used if Motion detection/
`
J
Video analytics is used.
4. According to your purpose, select from
motion detection and intelligent video
analysis.
5. Set <Sensitivity>, <Size> and <area>.
When selected Intelligent Video
Analysis, set <analytics> too.
6. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 116)
7. When done, click [apply (
120_ setup screen
)> tab.
)].