Samsung SNP-6320RH User Manual page 78

setup screen
pt limit
You can specify restrictions on the pan or tilt function.
1. From the Setup menu, select the
<ptZ (
2. Click <pt limit>.
3. Decide if you want to limit the PT
operations. If so, specify the details.
• Mode : Select a mode to set
between Pan limit and Tilt limit.
• Use : Select whether to use limit in
set mode.
• Action : PT limiting operation is set.
- [
- [
end points.
- [
input dialog.
4. Set the Propotional PT mode.
Pan and tilt speed is adjusted according to the zoom magnification. As the zoom
magnification grows, the pan and tilt speed decreases.
• Off : Turns off the zoom interworking mode.
• Slow : The manual pan and tilt control speed is changed according to the zoom
magnification. It slows down by 20%.
• Normal : he manual pan and tilt control speed is changed according to the zoom
magnification.
• Fast : the manual pan and tilt control speed is changed according to the zoom
magnification. It speeds up by 20%.
78_ setup screen
)> tab.
] : Start limit setting.
] : Provide the start and
] : If you want to change the point setting, click this to return to the