Inserting/Removing A Sd Memory - Samsung SNP-6320RH User Manual

installation & connection
inSertinG/removinG a SD memory carD
Disconnect the power cable from the camera before inserting the SD memory card.
`
J
Tighten the screws when assembling the camera body, shield cover and SD holder bracket to
`
prevent moisture penetration.
When mounting or dismounting an SD memory card, place the main body on the floor first to
`
prevent part loss and falling accident.
inserting a SD memory card
1. Separate with hands the screws in front of and on
the rear of the shield cover.
2. Unfasten four screws by turning them
counterclockwise using a driver to separate the
shield cover.
3. Unfasten two screws on the SD holder bracket by
turning them counterclockwise using the driver.
Do not remove the screws.
`
J
28_ installation & connection