setup screen
network disconnection
When the network is physically disconnected, it is considered as an event to be saved.
1. From the Setup menu, select the
<event (
2. Click <network disconnection>.
3. Set whether or not to <enable> .
4. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 116)
5. When done, click [apply (
auto tracking
You can set the system to generate event signals when you activate the auto tracing function.
1. From the Setup menu, select the
<event (
2. Click <auto tracking>.
3. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 116)
4. When done, click [apply (
128_ setup screen
)> tab.
)> tab.
)].
)].