KDB-GOM
Series
No
17
Part name
Power transformer
Replacement steps
Unplug the boiler from the electric outlet.
Open the front cover.
Separate the harness jack connecting the power transformer and the controller.
Unscrew the 2 screws fixing the power transformer and separate it from the boiler.
Fix the power transformer to the boiler by screwing the 2 screws.
Put the power transformer harness jack into the controller.
Plug the power cord into the outlet and check its operation. If everything is fine, close the front cover.
Plug the boiler power cord into the outlet.
Caution
Make sure the connecting jack is connected properly.
- 96 -