Expansion Tank - Saturn KDB - 161 GOM Manual

No 6
Unplug the boiler from the electric outlet.
Open the front cover.
Release the circulation pipe clip.
Release the circulation pipe.
Remove the nut for heating water filling pipe.
Release the nut for circulation pipe connecting the expansion tank and the various parts.
Separate the expansion tank by removing the two screws fixing its front cover.
Screw the two screws fixing the expansion tank to the front cover.
Tighten the nut for circulation pipe connecting the expansion tank and the various parts.
Connect the circulation pipe connected to circulation inlet hose and insert the clip.
Connect the power cord, check for water leak after replenishing water, and if everything is fine, close the front
cover.
Plug the boiler into the electric outlet.
1. Check for water leak after assembly.
2. Check whether the sensor wire is correctly connected.
Part name
Replacement steps
Caution
- 84 -
KDB-GOM

Expansion tank

Series