No
10
Unplug the boiler from the electric outlet.
Open the front cover.
Separate the two high voltage cables of the ignition transformer connected to the electrode from the electrode.
Separate the ignition transformer power cord jack.
Separate the ignition transformer by unscrewing the two screws.
Screw the two screws fixing the ignition transformer.
Connect the ignition transformer power cord jack.
Connect the ignition transformer's two high voltage cords to the electrode.
Close the boiler's front cover.
Plug the boiler into the electric outlet.
1. Make sure fixation is done correctly.
2. Check the connection of the connection jack.
Part name
Replacement steps
Caution
- 88 -
KDB-GOM
Ignition transformer
Series