Saturn KDB - 161 GOM Manual page 87

KDB-GOM
Series
No 9 Part name Heating strainer
Replacement steps
Unplug the boiler from the electric outlet.
Open the front cover.
Release the heating water inside the boiler by unscrewing the drain screw below the circulator pump.
Separate the strainer by separating the shaped lock.
Separate the hot water heat exchanger from the strainer by removing the connecting clip.
Separate the expansion tank from the strainer by removing the connecting connection.
Fix the strainer to the boiler.
Fix the hot water heat exchanger by inserting the connecting clip.
Fix the expansion tank and the strainer by inserting the connecting connection.
Fix the strainer by screwing the 3 screws under the front cover (check the packing status between the strainer
and return inlet connection).
Fix the strainer and the shaped lock.
Screw the drain screw under the circulator pump.
Unplug the power cord and after water replenishment, check for water leak
If everything is fine, close the front cover.
Plug the boiler into the electric outlet.
Caution
Check for water leak after assembly.
- 87 -