Schematic Of Piping Installation; Mixing Type Valve - Saturn KDB - 161 GOM Manual

A THERMOSTATIC MIXING VALVE MUST BE ADDED TO THIS SYSTEM TO PREVENT SCALDING. IF YOU
CANNOT FIND A MIXING VALVE LOCALLY, PLEASE CONTACT YOUR QUIETSIDE DEALER OR LOCAL
SPECIALITY PLUMBING SUPPLIER.

Mixing type valve:

- Controls the desired hot water temperature and ensures constant hot water temperature in the faucets
- Ensures safety through the built-in anti-burn/scald safeguard. Limits the deposits and accumulation of scale.
- Includes built-in wire mesh filters and check valves for long and trouble-free operation.
There is a risk in using fuel burning appliances in rooms or areas where gasoline, other flammable liquids or engine
driven equipment or vehicles are stored, operated or repaired. Flammable vapors are heavy and travel along the floor
and may be ignited by the igniter or main burner flames causing fire or explosion. Some local codes permit operation of
gas appliances if installed 5.0M or more above the floor. This may reduce the risk if location in such an area cannot be
avoided.
Flammable items, pressurized containers or any other potential fire hazardous articles must never be placed on or
adjacent to the boiler.
Open containers of flammable material should not be stored or used in the same room with the boiler.
DO NOT INSTALL THIS BOILER DIRECTLY ON A CARPETED FLOOR. A FIRE HAZARD MAY RESULT. INSTEAD
THE BOILER MUST BE PLACED ON A METAL OR WOOD PANEL EXTENDING BEYOND THE FULL WIDTH AND
DEPTH BY AT LEAST 75mm IN ANY DIRECTION. IF THE HEATER IS INSTALLED IN A CARPETED ALCOVE OR
CLOSET, THE ENTIRE FLOOR SHOULD BE COVERED BY THE PANEL.
Fig. Schematic of piping installation
- 40 -
KDB-GOM
68 77
122 86
131
113
50 9 9 F
104 140 F MAX
OF F
ROOM TEMP.
Series