Convenience Closing Feature - Mercedes-Benz M-Class Operator's Manual

SmartKey
74
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
The Product label with FCC ID and IC
certification number can be found in the
battery case of the SmartKey.
Important notes on the use of KEYLESS-
GO
The KEYLESS-GO key can be used like a
R
conventional key.
You can combine KEYLESS-GO functions
R
with those of a conventional key, e.g.
unlock with KEYLESS-GO and lock with the
& button.
Always carry your KEYLESS-GO key on your
R
person.
Do not keep the KEYLESS-GO key together
R
with:
electronic devices, e.g. a mobile phone
-
or another key
metallic objects, e.g. coins or metal foil.
-
This can affect the functionality of
KEYLESS-GO.
When locking and unlocking using
R
KEYLESS-GO, the distance between the
SmartKey and the corresponding door
handle must not exceed 3 ft (1 m).
If the KEYLESS-GO key is removed from the
R
vehicle, it is possible that the system may
not recognize the SmartKey. The vehicle
can then not be locked or started using
KEYLESS-GO.
If the KEYLESS-GO key has been removed
R
from the vehicle, e.g. if a passenger leaves
the vehicle with a KEYLESS-GO key:
To unlock the vehicle: touch the inner
X
surface of the door handle.
To lock the vehicle: touch sensor
X
surface :.
Convenience closing feature: touch
X
recessed sensor surface ; for an
extended period (
If you pull on the handle of the tailgate, only
the cargo compartment of the vehicle is
unlocked.
Changing the settings of the locking
system
You can change the setting of the locking
system in such a way that only the driver's
door and the fuel filler flap are unlocked. This
is useful if you frequently travel on your own.
To change the setting: press and hold
X
down the % and & buttons
simultaneously for approximately six
seconds until the battery check lamp
( page 76) flashes twice.
Y
i
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the & or % button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
To unlock the driver's door: press the
X
% button once.
To unlock centrally: press the %
X
button twice.
To lock centrally: press the & button.
X
I n f o r ma t i o n P r o v i d e d b y :
page 87).
Y