Hold Function - Mercedes-Benz M-Class Operator's Manual

because of its narrow width. The distance to
the vehicle in front will be too short.
Obstructions and stationary vehicles
DISTRONIC PLUS does not brake for
obstacles or stationary vehicles. If, for
example, the detected vehicle turns a corner
and reveals an obstacle or stationary vehicle,
DISTRONIC PLUS will not brake for these.
Crossing vehicles
DISTRONIC PLUS may mistakenly detect
vehicles that are crossing your lane.
Activating DISTRONIC PLUS at traffic lights
with crossing traffic, for example, could cause
your vehicle to pull away unintentionally.

HOLD function

General notes
The HOLD function can assist the driver in the
following situations:
when pulling away, especially on steep
R
slopes
when maneuvering on steep slopes
R
when waiting in traffic
R
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
Activation conditions
You can activate the HOLD function if:
the vehicle is stationary.
R
the engine is running.
R
the driver's door is closed or if your seat
R
belt is fastened.
the electric parking brake is released.
R
the transmission is in position D, R or N.
R
DISTRONIC PLUS is deactivated.
R
Activating the HOLD function
Make sure that the activation conditions
X
are met.
Depress the brake pedal.
X
Quickly depress the brake pedal further
X
until HOLD
multifunction display.
The HOLD function is activated. You can
release the brake pedal.
I n f o r ma t i o n P r o v i d e d b y :
Driving systems
display : appears in the
179
Z