Important Safety Notes - Mercedes-Benz M-Class Operator's Manual

Hide thumbs Also See for M-Class:
Table of Contents

Advertisement

Replacing bulbs
114
To switch off: set the rocker switch to the
X
| position.
The interior lighting automatically switches
on if you:
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition lock
R
The interior light is activated for a short while
when the SmartKey is removed from the
ignition lock. You can activate this delayed
switch-off using the on-board computer
(
page 235).
Y
Manual interior lighting control
To switch the front interior lighting on:
X
set the rocker switch to the c position.
To switch the front interior lighting off:
X
set the rocker switch to the | position.
To switch the rear interior lighting on/
X
off: press the u button.
To switch the reading lamps on/off:
X
press the p button.
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
To switch off the crash-responsive
X
emergency lighting: press the hazard
warning lamp button.
or
Lock and then unlock the vehicle using the
X
SmartKey.
Replacing bulbs

Important safety notes

Xenon bulbs
If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the engine. For this to be
observed, the lights must be switched on
before starting the engine.
G
DANGER
Xenon bulbs carry a high voltage. You could
get an electric shock and be seriously or even
fatally injured if you touch the electric
contacts on Xenon bulbs. Therefore, never
remove the cover from Xenon bulbs.
Do not change Xenon bulbs yourself, but have
them replaced at a qualified specialist
workshop which has the necessary specialist
knowledge and tools to carry out the work
required.
Mercedes-Benz recommends that you use an
authorized Mercedes-Benz Center for this
purpose. In particular, work relevant to safety
or on safety-related systems must be carried
out at a qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.
Other bulbs
There are bulbs other than the Xenon bulbs
that you cannot replace. Replace only the
bulbs listed (
page 115). Have the bulbs that
Y
you cannot replace yourself changed at a
qualified specialist workshop.
Mercedes-Benz recommends that you use an
authorized Mercedes-Benz Center for this
purpose. In particular, work relevant to safety
or on safety-related systems must be carried
out at a qualified specialist workshop.
If you require assistance changing bulbs,
consult a qualified specialist workshop.
Do not touch the glass tube of new bulbs with
your bare hands. Even minor contamination
can burn into the glass surface and reduce
the service life of the bulbs. Always use a lint-
free cloth or only touch the base of the bulb
when installing.
Only use bulbs of the correct type.
I n f o r ma t i o n P r o v i d e d b y :

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents