Convenience Closing Feature - Mercedes-Benz B-Class Operator's Manual

Side windows
84
Front left
:
Front right
;
Rear right
=
Rear left
?
i
When the override feature for the side
windows is activated (
windows cannot be operated from the rear.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open: press the corresponding switch.
X
To open fully: press the corresponding
X
switch beyond the point of resistance.
Automatic closing is started.
To close: pull the corresponding switch.
X
To close fully: pull the corresponding
X
switch beyond the pressure point.
Automatic closing is started.
To interrupt the automatic opening/
X
closing: press/pull the corresponding
switch again.
i
If you press the switch beyond the point
of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
i
You can continue to operate the side
windows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minutes or until the
driver's or front-passenger door is opened.
Convenience opening
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to
carry out the following functions
simultaneously:
R
R
R
i
X
page 62), the side
Y
X
X
X

Convenience closing feature

G
When the convenience closing feature is
operating, parts of the body could become
trapped in the closing area of the side window
and the sliding sunroof. There is a risk of
injury.
Observe the complete closing procedure
when the convenience closing feature is
operating. Make sure that no body parts are
in close proximity during the closing
procedure.
unlock the vehicle
open the side windows
open the panorama roof with power tilt/
sliding panel and the roller sunblinds
The convenience opening feature can
only be operated using the SmartKey. The
SmartKey must be close to the driver's
door handle.
Point the tip of the SmartKey at the driver's
door handle.
Press and hold the % button until the
side windows and the panorama roof with
power tilt/sliding panel are in the desired
position.
If the roller sunblinds of the panorama roof
with power tilt/sliding panel are closed, the
roller sunblinds are opened first.
Press and hold the % button again until
the panorama roof with power tilt/sliding
panel is in the desired position.
To interrupt convenience opening:
release the % button.
WARNING