Mercedes-Benz M-Class Operator's Manual page 68

Driving safety systems
66
At speeds of above approximately
20 mph (30 km/h), if the driver and front
passenger have fastened their seat belts,
®
PRE-SAFE Brake can:
brake the vehicle automatically at speeds
R
up to approximately 124 mph (200 km/h)
trigger preventative occupant protection
R
measures (PRE-SAFE
Due to the nature of the system, particularly
complicated driving conditions may cause
unnecessary warnings or the unnecessary
intervention of PRE-SAFE
braking action, you can either depress the
accelerator pedal further, activate kickdown
or release the brake pedal.
The braking action of PRE-SAFE
ended automatically if:
your speed drops below approximately
R
9 mph (15 km/h).
you maneuver to avoid the obstacle.
R
there is no longer any danger of a rear-end
R
collision.
there is no longer an obstacle detected in
R
front of your vehicle.
If you have activated DSR (
®
SAFE Brake is deactivated.
i
USA only: this device has been approved
by the FCC as a "Vehicular Radar System".
The radar sensor system is intended for use
in an automotive radar system only.
Removing, altering or tampering with the
device will void any warranties, and is not
permitted by the FCC. Do not tamper with,
alter, or use in any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
i
Canada only: this device complies with
RSS-210 of Industry Canada. Operation is
subject to the following two conditions:
1. This device may not cause interference,
and
®
) ( page 49)
Y
®
Brake. To stop the
®
Brake is
page 208), PRE-
Y
I n f o r ma t i o n P r o v i d e d b y :
2. this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Removal, tampering, or altering of the
device will void any warranties, and is not
permitted. Do not tamper with, alter, or use
in any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
With the help of the radar sensor system,
®
PRE-SAFE Brake can detect obstacles that
are in front of your vehicle for an extended
period of time.
At speeds up to approximately 40 mph
(70 km/h), PRE-SAFE
to stationary obstacles, for example stopped
or parked vehicles.
If you approach an obstacle and PRE-SAFE
Brake detects a risk of collision, the system
will initially alert you both visually and
acoustically. If you do not brake or take
evasive action, the system will warn you by
automatically braking the vehicle gently. If
there is an increased risk of collision,
preventative passenger protection measures
®
(PRE-SAFE ) are activated (
risk of collision remains and you do not brake,
take evasive action or accelerate
significantly, the vehicle may perform
automatic emergency braking. Automatic
emergency braking is not performed until
immediately prior to an accident that can no
longer be avoided.
G
WARNING
®
Even if PRE-SAFE Brake slows the vehicle
before an imminent rear-end collision, the
system cannot avert a collision without the
intervention of the driver. There is a risk of an
accident. Brake according to the situation or
take evasive action. Delayed intervention by
the driver can lead to an accident.
®
Brake can also react
page 49). If the
Y
®