Mercedes-Benz M-Class Operator's Manual page 114

Hide thumbs Also See for M-Class:
Table of Contents

Advertisement

Exterior lighting
112
The hazard warning lamps are deactivated
automatically if the vehicle returns to a speed
of over 6 mph(10 km/h) after a full
application of the brakes.
i
The hazard warning lamps still operate if
the ignition is switched off.
Adaptive Highbeam Assist
You can use this function to set the
headlamps to change between low beam and
high beam automatically. The system
recognizes vehicles with their lights on, either
approaching from the opposite direction or
traveling in front of your vehicle, and
consequently switches the headlamps from
high beam to low beam.
The system automatically adapts the low-
beam headlamp range depending on the
distance to the other vehicle. Once the
system no longer detects any other vehicles,
it reactivates the high-beam headlamps.
The system's optical sensor is located behind
the windshield near the overhead control
panel.
To activate: activate the Adaptive
X
Highbeam Assist function using the on-
board computer (
Turn the light switch to c or Ã.
X
page 234).
Y
Press the combination switch beyond the
X
pressure point in the direction of arrow :
(
page 111).
Y
If it is dark and the light sensor activates
the low-beam headlamps, the _
indicator lamp in the instrument cluster
lights up.
If you drive faster than approximately
28 mph (45 km/h):
the headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you drive faster than approximately
35 mph (55 km/h) and no other road users
are identified:
the high-beam headlamps are switched on
automatically. The K indicator lamp in
the instrument cluster also lights up.
When you drive slower than approximately
30 mph (45 km/h) or if other road users
are identified or if the roads are sufficiently
illuminated:
the high-beam headlamps are switched off
automatically. The K indicator lamp in
the instrument cluster goes out. The _
indicator lamp in the instrument cluster
stays on.
To deactivate: move the combination
X
switch back to its normal position.
The _ indicator lamp in the instrument
cluster goes out.
G
WARNING
The Adaptive Highbeam Assist is only an aid
intended to support you while driving. The
driver is and remains responsible for proper
vehicle lighting in accordance with the
prevailing light, sight and traffic conditions.
The system may be impaired or unavailable
when
visibility is poor, e.g. due to snow, rain, fog,
R
or heavy spray
the optical sensor area of the windshield is
R
dirty, fogged up, or covered by a sticker for
example
I n f o r ma t i o n P r o v i d e d b y :

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents