Convenience Closing Feature - Mercedes-Benz GLC Operator's Manual

Side windows
92
The switches on the driver's door take prece-
dence.
Front left
:
; Front right
Rear right
=
Rear left
?
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open manually: press and hold the cor-
X
responding switch.
To open fully: press the switch beyond the
X
pressure point and release it.
Automatic operation is started.
To close manually: pull the corresponding
X
switch and hold it.
To close fully: pull the switch beyond the
X
pressure point and release it.
Automatic operation is started.
To interrupt automatic operation: press/
X
pull the corresponding switch again.
If you press the switch beyond the pressure
point and release, automatic operation is star-
ted in the corresponding direction. You can stop
automatic operation by pressing/pulling the
switch again.
You can continue to operate the side windows
after you switch off the engine or remove the
SmartKey. This function remains active for five
minutes or until you open a front door.
When the override feature for the side windows
is activated, the side windows cannot be oper-
ated from the rear (
Information on opening and closing the roller
sunblinds on the rear side windows
( page 303).
Y
page 65).
Y
Convenience opening
General notes
If the SmartKey is in close proximity to the vehi-
cle, the convenience opening function is availa-
ble.
Vehicles with KEYLESS-GO or KEYLESS-GO
start function: you can ventilate the vehicle
before you start driving.
To do this, the SmartKey is used to carry out the
following functions simultaneously:
unlock the vehicle
R
open the side windows
R
open the panorama roof with power tilt/slid-
R
ing panel and the roller sunblind
switch on the seat ventilation for the driver's
R
seat
The "convenience opening" feature is also avail-
able when the vehicle is unlocked.
Convenience opening
Press and hold the % button on the Smart-
X
Key until the side windows and the panorama
roof with power tilt/sliding panel are in the
desired position.
If the roller sunblinds of the panorama roof
with power tilt/sliding panel are closed, the
roller sunblinds are opened first.
Press and hold the % button again until the
X
panorama roof with power tilt/sliding panel is
in the desired position.
To interrupt convenience opening: release
X
the % button.

Convenience closing feature

Important safety notes
G
WARNING
When the convenience closing feature is oper-
ating, parts of the body could become trapped
in the closing area of the side window and the
sliding sunroof. There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is oper-
ating. Make sure that no body parts are in
close proximity during the closing procedure.