Memory Function - Mercedes-Benz M-Class Operator's Manual

i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
i
You can also store the parking position
using memory button M ?.
Make sure that the SmartKey is in
X
position 2 in the ignition lock.
With the exterior mirror on the front-
X
passenger side activated, use
adjustment button = to adjust the
exterior mirror to a position which
allows you to see the rear wheel and
the curb.
Press memory button M ? and one of
X
the arrows on adjustment button =
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
Turn the SmartKey to position 2 in the
X
ignition lock.
Adjust the exterior mirror on the front-
X
passenger side with the corresponding
button ( page 103).
Y
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h).
about ten seconds after you have
R
disengaged reverse gear
if you press button : for the exterior
R
mirror on the driver's side

Memory function

Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: steering wheel position
R
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
G
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
Adjust the seat (
X
On the driver's side, adjust the steering
X
wheel ( page 101) and the exterior mirrors
Y
( page 103).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
I n f o r ma t i o n P r o v i d e d b y :
Memory function
page 96).
Y
105
Z