Mercedes-Benz M-Class Operator's Manual page 100

Seats
98
Adjusting the rear seat head restraint
height
If the head restraint is fully lowered, it is
X
necessary to press release catch :.
To raise: pull the head restraint up to the
X
desired position.
To lower: press release catch : and push
X
the head restraint down until it is in the
desired position.
Adjusting the rear seat head restraint
angle
Adjust the head restraints so that they are as
close as possible to your head.
You can only adjust the two outer head
restraints.
Using both hands, reach backwards and
X
grasp the sides of the head restraint.
Pull the lower edge of the head restraint
X
forwards or backwards until it is in the
desired position.
Removing and installing the rear seat
head restraints
To remove: pull the head restraint up to
X
the stop.
Press release catch : and pull the head
X
restraint out of the guides.
To re-install: insert the head restraint so
X
that the notches on the bar are on the left
when viewed in the direction of travel.
Push the head restraint down until you hear
X
it engage in position.
Adjusting the backrests in the 2nd
row of seats
You can adjust the angle of the backrests in
the second row of seats. There are ten detent
positions to choose from.
I n f o r ma t i o n P r o v i d e d b y :