Connecting An Rgb Signal - Barco NH-12 User Manual

4. Installation
Image 4-15
Input/Output layers
Layer 3,4,5 are fixed i.e. they may only be fitted with the boards mentioned above.
An optional board (SDI/HDSDI or DVI) is to be installed on the first or second (by default empty) layer
The system section
The bottom system section holds :
• Ethernet RJ45 connection
• DVI desktop input
• LCD display
4.5.3

Connecting an RGB signal

How to connect an RGB signal ?
1. Connect the BNC connectors to the projector's RGB input
24
R / PR R / PR R / PR G / Y G / Y G / Y B / PB B / PB B / PB Hs / Cs Hs / Cs Hs / Cs Vs
Vs Vs
DVI DVI DVI COMPUTER COMPUTER COMPUTER
RS 232 C RS 232 C RS 232 C DVI DVI DVI
DESKTOP INPUT DESKTOP INPUT DESKTOP INPUT
LAYER1
LAYER2
LAYER3
VIDEO VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO
LAYER4
LAYER5
R.C. R.C. R.C.
R59770121 NH-12 04/05/2011