Standby Timer - Barco Galaxy NH-12 User Manual

7. Advanced
Image 7-130
5. Press ENTER to activate the Freeze function
The image can also be frozen using the FREEZE key on the RCU
7.8.4

Standby Timer

What can be done ?
If there is no (sync) signal at any of the input connectors, and the standby timer is enabled, the projector will shut down after a pre
determined time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Standby Timer
Image 7-131
5. Press ENTER
A dialog box is displayed
Image 7-132
6. Use ↑ or ↓ to select the radio button Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑ or ↓ to browse to the input field
8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown time
9. Press MENU or BACK to exit or to go back to the previous menu
124 R59770122 BARCO GALAXY NH-12 20/01/2015