Enlarging Or Reducing An Image - Lexmark 5000 Series User Manual

b
Click to preview the image.
c
Click to scan the image.
Related topics:
•
"Using the All-In-One Center" on page 110
Enhancing photo print quality using the software
1
From the Finder desktop, double-click the Lexmark 5000 Series folder.
2
Double-click the Lexmark 5000 Series Center icon.
3
From the "What is being scanned?" menu, choose Photo.
4
From the "How will the scanned image be used?" pop-up menu, choose To be printed or To be viewed on
monitor/web page. Photo scanning is optimized based on this selection.
5
Click Preview/Edit to open the Scan dialog.
6
From the dialog, select Preview.
7
Reload the photo into the ADF, then click Close on the reminder dialog.
Note: Click on the check box on the reminder dialog if you do not want this dialog to reappear until you reopen
the application.
8
From the Scan dialog, click
9
From the Settings tab, make sure you select one of the preset scan settings appropriate for your photo.
You can also customize scan settings by adjusting color depth, resolution, and choosing a descreening option.
10
Select the Adjustments tab, and fine-tune the scan settings.
Related topics:
•
"Using the All-In-One Center" on page 110
•
"Customizing scan settings from the Scan dialog" on page 67

Enlarging or reducing an image

1
Load paper.
Note: If you are copying photos, use photo or heavyweight matte paper, with the glossy or printable side facing
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2
Load an original document or photo facedown in the Automatic Document Feeder (ADF).
3
From the control panel, press Copy Mode.
4
Press .
5
Press or repeatedly until Resize appears.
6
Press .
to open the Scan Settings drawer.
Working with photos
87