Saving Settings - Lexmark 5000 Series User Manual

From here
Defaults
Related topics:
•
"Using the control panel" on page 95

Saving settings

In a setting menu, an * appears next to the default setting. To change the setting:
1
From the control panel, press Settings, and then press
and then press :
•
To save most settings. An * appears next to the saved setting.
•
To select a temporary setting. An * appears next to the selected setting. See the table below for a list of
temporary settings.
Note: The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off.
Temporary settings
Copy Mode
Scan Mode
Fax Mode
2
To change the timeout feature:
a
Press Settings.
b
Press or repeatedly until Device Setup appears, and then press
c
Press or repeatedly until Clear Settings Timeout appears, and then press
d
Press or repeatedly until Never appears, and then press
3
To change one or more temporary settings into new default settings:
a
Press Settings.
b
Press or repeatedly until Defaults appears, and then press
c
Press or repeatedly until Set Defaults appears, and then press
d
Press or repeatedly until Use Current appears, and then press
You can
Select:
•
Photo Print Size to choose the size of photo(s) to print.
•
Set Defaults to change default settings. For more information,
see "Saving settings" on page 103.
•
Copies
•
Resize
•
Lighter/Darker
•
Quality
•
Repeat Image
•
N-Up
•
Original Size
•
Original Type
•
Quality
•
Original Size
•
Quality
•
Lighter/Darker
Understanding the printer
103
or repeatedly until the setting you want appears,
.
.
.
.
.
.