Lexmark 5000 Series User Manual page 100

The message, PictBridge camera detected. Press
display.
Warning: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively
printing from a PictBridge-enabled digital camera. A loss of data can occur. Also, do not remove the USB cable
or network adapter while actively printing from a PictBridge-enabled digital camera.
2
Press or repeatedly until the menu item you want appears.
3
Press .
4
Press or repeatedly until the submenu item you want or the setting you want appears.
5
Press .
Note: Pressing selects a setting. An * appears next to the selected setting.
6
To go into additional submenus and settings, repeat the above steps.
7
If necessary, press
Menu Item
1, 2
Paper Setup
1, 2
Photo Size
1
Layout
1
Quality
1
Setting will return to factory default setting when the PictBridge-enabled digital camera is removed.
2
Setting must be saved individually.
Related topics:
•
"Using the control panel" on page 95
repeatedly to return to the previous menus and make other setting selections.
Action
Specify the size and type of paper loaded.
Specify the size of printed photos.
Note: If you did not specify the photo size beforehand in your digital camera,
the default photo sizes are:
•
4 x 6 (if Letter is your default Paper Size)
•
10 x 15 cm (if A4 is your default Paper Size, and your country is not
Japan)
•
L (if A4 is your default Paper Size, and your country is Japan)
Center one photo on a page, or specify the number of photos to print on a
page.
Adjust the quality of printed photos.
Understanding the printer
to change settings. appears on the
100