Lexmark 5000 Series User Manual page 69

3
From the All-in-One Center dialog, click Preview/Edit.
4
From the dialog, select Preview.
5
Reload the photo into the ADF, and then click Close on the reminder dialog.
Note: Select the check box on the reminder dialog if you do not want the dialog to reappear until you reopen
the application.
6
Select Auto-crop sensitivity.
Note: Selecting Auto-crop sensitivity automatically selects the area to be scanned.
7
If you are satisfied with the cropped image, click
If you are not satisfied with the cropped image, make adjustments.
a
Use any of these methods to make adjustments:
•
Move the slider.
Note: The slider adjusts the file size, width, and height of the image. If the dashed border seems to
disappear, the crop area is set beyond the size of the image.
•
Click and drag the nodes to expand or minimize the crop area.
•
Click and drag the crop area to a part of the image you want copied.
Note: These actions will deactivate Auto-crop sensitivity.
b
Click to preview the image.
c
Click to scan the image.
Related topics:
•
"Using the All-In-One Center" on page 110
Adjusting the brightness of an image
1
From the Finder desktop, double-click the Lexmark 5000 Series folder.
2
Double-click the Lexmark 5000 Series Center icon.
3
From the All-In-One Center, click Preview/Edit to open the Scan dialog.
4
From the dialog, click Preview.
5
Reload the document into the ADF, and then click Close on the reminder dialog.
Note: Click on the check box on the reminder dialog if you do not want this dialog to reappear until you reopen
the application.
6
Click to open the Scan Settings drawer.
7
Select the Adjustments tab.
8
From the Brightness area, move the slider to lighten or darken the image.
.
Scanning
69