Boot to Command Mode
Command Mode provides functions for:
Performing a Program Download to transfer an application program from the host
•
system to the WWC 1000 (refer to
Running the Self-Test program to verify that the hardware is operating properly
•
(refer to
Chapter 7, Maintainance and
Performing a Memory Transfer to upload data from the WWC 1000 to the host
•
system (refer to
To boot to Command Mode:
1. Press <ENTER+FUNC>.
2. Press and release the Power button.
3. Release <ENTER+FUNC>.
Chapter 7, Maintainance and
Ending Communications on page
Troubleshooting).
Troubleshooting).
Operating the WSS 1000
3-6).
6-5