Send Pause; Setup Field(S); Move Cursor To A Character - Symbol Cyclone M2000 Series Product Reference Manual

Cyclone

Send Pause

Setup Field(s)

Use the following bar codes to move the cursor in relation to a specified
character.
Note:
If there is no match when the rule is interpreted and the rule fails, the
next rule is checked.

Move Cursor To a Character

Scan the Move Cursor To Character bar code, then any printable ASCII
character from the
cursor to the position after the matching character. If the character is not there,
the rule fails and ADF tries the next rule.
4-32
TM
M2000 Series Product Reference Guide
Send Pause
Alphanumeric Keyboard
Move Cursor To
Character
on page 4-89. This moves the