Toshiba T2150 series Maintenance Manual page 149

4.14 T2150CDS FL
CAUTION: When you remove the FL, be careful not to let any dust or other
foreign matter enter the display panel components.
Removing the T2150CDS FL
To remove the T2150CDS FL, follow the steps below. Refer to figures 4-25 through 4-28.
1. Turn off the power to the T2150CDS. Disconnect the AC power cable, and all
external cables connected to the T2150CDS.
2. Remove the battery pack, optional memory module, optional PCMCIA card,
display mask, FL inverter board, and LCD module as described in sections 4.2
through 4.4, and 4.11 through 4.13.
3. Release 11 latches securing the LCD module to its frame (figure 4-25).
4. Turn the LCD module over and remove four screws (figure 4-25).
Figure 4-25 Unbending the color LCD module latches
4-34
T2150 Series