4.4
Optional PCMCIA Card
Removing an Optional PCMCIA Card
To remove an optional PCMCIA card from the T2150 series, follow the steps below and refer
to figures 4-7 and 4-8.
1.
Turn off the power. Disconnect the AC power card and all external cables con-
nected to the T2150 series.
2.
Remove the battery pack as described in section 4.2.
3.
Pull open the slot cover (figure 4-7).
4.
Press the eject button to pop the card out slightly, then remove it (figure 4-8).
T2150 Series
Figure 4-7 Opening the PCMCIA slot's Cover
Figure 4-8 Removing the PCMCIA card
4-11