Installing the T2150CDS Color LCD Module
To install the T2150CDS's Color LCD module, follow the steps below and refer to figure 4-
24.
1.
Connect the display cable to the LCD module, and carefully rotate the LCD
module into place in the display cover (figure 4-24).
2.
Secure four M2.5x6 screws with ground cable on the LCD module (figure 4-
24).
3.
Install the FL inverter board, display mask, optional PCMCIA card optional
memory module, and battery pack as described in sections 4.12, 4.11, and 4.4 back
through 4.2.
T2150 Series
4-33