Toshiba T2150 series Maintenance Manual page 113

(e)
(f)
(g)
T2150 Series
When alarm Volume is selected, the subwindow below is displayed to
let you enable or disable certain speaker functions.
ALARM VOLUME OPTIONS
Low Battery Alarm
Panel Close Alarm
Enabled Enables the feature. (Default)
Disabled Disables the feature.
System Beep
Use this feature to enable or disable the system beep.
Enabled Enables the feature. (Default)
Disabled Disables the feature.
Panel Power On/Off
This option allows you to automatically turn your T2150 series
computer on or off by opening or closing the display panel. If this
feature is enabled when the computer is in Resume mode, the system is
automatically powered off when the display panel is closed and pow-
ered on when the panel is opened. This option is not displayed when
the computer is in boot mode.
Enabled Enables the feature.
Disabled Disables the feature. (Default)
NOTE: Do not remove the AC power cord and battery pack at the
same time when you use this feature. If you do so, data saved by
AutoResume will be lost. You must also reset this option.
Alarm Power On
This option lets you set the time for the system to turn on automati
cally. For example, if you are expecting to receive a modem transmis-
sion at a time you are away or asleep, you can set this option to the
time of the transmission. This option does not automatically turn the
system off. This feature is effective in either Resume or boot mode.
00:00:00 Sets the power on time (24-hour clock).
(hour:minute:seconds)
Disabled Disables the alarm. (Default)
= Enabled
= Enabled
3-65