Toshiba T2150 series Maintenance Manual page 134

4. Turn the computer so the front faces you and open the display. Place a book or
other support behind the computer and lay the display back fully on the support.
5. Lift the battery's mylar insulator from right to left.
6. Remove the four flat-head M2.5x6 screws on the battery pack frame (figure
4-16).
7. Remove two M2.5x8 silver screws on the top cover (figure 4-16).
8. Unsnap the six latches securing the top cover to the base assembly (figure 4-17).
9. Disconnect the display sensor switch cable from PJ11 on the system board
(figure 4-17).
10. Disconnect the display cable from PJ17 on the system board (figure 4-17).
11. Disconnect the speaker cable from PJ 501 (figure 4-18).
12. Lift the top cover with display assembly straight up out of the bottom unit (figure
4-17).
T2150 Series
Figure 4-16 Removing the six screws
4-19