Toshiba T2150 series Maintenance Manual page 146

Installing the FL Inverter Board
To install the T2150CDS's FL inverter board, follow the steps below and refer to figure 4-23.
1. Connect the microphone and the volume cable to the volume board (figure 4-23).
2. Secure the volume board with one M2.5x6 screw (figure 4-23).
3. Connect the FL inverter cable and FL cable to CN1 and CN2 on the FL inverter
board (figure 4-23).
4. Rotate the FL inverter and seat the FL inverter board and route the cables so
they will not be pinched by the display cover or other components.
5. Secure the FL inverter board with two M2.5x6 screws (figure 4-23).
6. Install the display mask, optional PCMCIA card, optional memory card, and
battery pack as described in 4.11, and 4.4 back through 4.2.
T2150 Series
4-31