4.2
The Battery Pack
Removing the Battery Pack
To remove the T2150 series battery pack, follow the steps below and refer to figures 4-1 to
4-3.
1.
Turn the computer's power off.
2.
Remove all cables connected to the computer and open the display panel.
3.
Push up on two latches on the front of the palm rest until you feel them click.
4.
Carefully slide the palm rest forward about one centimeter (less than half an inch).
T2150 Series
Figure 4-1 Opening the display panel
Figure 4-2 Unlatching the palm rest
4-5