8.
Remove one M2.4x4 screw on the sound board, then lift board slightly and pull
to the right to remove it.
9.
Remove two M2.5x8 silver screws from the HDD and remove the HDD bracket,
left side cover, and palm rest cover-support (figure 4-14).
10.
Slide the HDD to the left to disconnect the HDD connector (figure 4-14).
11. Lift the HDD out of the system unit.
4-16
Figure 4-13 Removing the sound board
Figure 4-14 Removing the HDD with bracket
T2150 Series