Toshiba T2150 series Maintenance Manual page 140

4. Remove four M2x3 black screws securing the bracket to the CD-ROM drive and
slip off the bracket (figure 4-20).
Installing the CD-ROM Drive
To install the T2150 series CD-ROM drive, follow the steps below and refer to figures 4-19
and figures 4-20.
1. Secure the bracket to the HDD with four M2x3 black screws (figure 4-20).
2. Place the CD ROM drive in the computer, and connect the CD-ROM cable to
PJ8, then secure to the system board and the CD-ROM front cover with three
M2.5x6 screws (figure 4-19).
3. Install the AC PS unit, display assembly, top cover, hard disk drive, keyboard,
optional memory module, optional PCMCIA card, and battery pack as described in
sections 4.8 back through 4.2.
T2150 Series
Figure 4-20 Removing the HDD
4-25